JVC iPod playback, Starting playback, Play/pause/search/skip, 1Connect an iPod while the System is turned off, 2Turn on the System, then select “IPod” as the

iPod playback

Set the remote control mode before operation.

Before selecting the video source to play

Make the appropriate setting for video output on the iPod.

Starting playback

DO NOT connect or disconnect the iPod when the System is turned on.

Be sure to reduce the volume on the System to the minimum level before connecting an iPod. Adjust the volume after playback has started.

1Connect an iPod while the System is turned off.

Docking station for iPod (supplied)

*

*Attach the dock adapter (supplied for the iPod or separately purchased) before placing the iPod.

( 33)

•Connect the plug with the arrow-mark side facing up.

2Turn on the System, then select “IPod” as the

source. ( 10)

“CONNECT” appears on the display. If the iPod is not connected firmly, “NO CONNE” appears.

3Start playing the iPod.

•Press 3 (play button) again if the iPod does not start playback.

Play/pause/search/skip

To do

Start playback

Pause
Fast-forward/fast-reverse	«Hold	«Hold
search within the current
track
Skip to the next/previous
item*

*While playing back a video

•The iPod enters sleep mode when you turn off the System or select another source.

•To show the still pictures in the iPod, play them back in slide-show mode on the iPod.

DO NOT touch the iPod terminal pins or the connector pins.

When the iPod is not charged through the System, the iPod may not be turned on from the System.

If the sound is distorted when audio sources with high recording levels are played, you are recommended to deactivate the equalizer on your iPod.

To view a video/picture from the iPod on the TV, connect the System to the TV via the AV (scart)

connector. ( 8)

You cannot send any data to your iPod from the System.

The iPod battery is charged only when “IPod” is selected as the source.

If the iPod which is not listed in “Playable digital devices”

( 3) is connected, the iPod may not be operated from the System. In this case, deactivate the iPod battery charge function so that the iPod may be operated, but the iPod cannot be charged through the System.

To deactivate the battery charge function

«Hold

“P.OFF” appears on the display.

To use the battery charge function, perform the above procedure again. “P.ON” appears on the display.

14