JVC Special playback for DVD Audio, Adjusting the picture quality (VFP), Playing back a bonus group, Selecting browsable still pictures, 1Select a bonus group

Adjusting the picture quality (VFP)

You can adjust the picture quality.

1

2Select the desired preset, then finish the setting.

See page 15 for button locations.

Special playback for DVD Audio

Playing back a bonus group

Some DVD Audio discs have a “bonus group.”

To play back a bonus group, you have to enter the specific “key number” (a password).

The way of getting the key number depends on the disc.

1Select a bonus group.

Select	Finish	The key number entry screen appears.
		On the TV	On the display

NORMAL	Normally select this.
CINEMA	Suitable for movies
USER1/	You can adjust parameters that affect
USER2	picture appearance. (See below.)

To adjust the picture tone

1Select “USER1” or “USER2” (see above).

2Select a parameter, then confirm the selection.

Select	Confirm
GAMMA	Controls the brightness of the
	neutral color
BRIGHTNESS	Controls the brightness of the
	entire picture
CONTRAST	Controls the contrast
SATURATION	Controls the color depth
TINT	Controls the tint
SHARPNESS	Controls the sharpness

3Adjust the parameter, then confirm the selection.

SelectConfirm

4Repeat steps 2 and 3 to adjust others.

5

When connecting the TV to the HDMI MONITOR

OUT terminal ( 7), the VFP setting has no effect.

2Enter the key number, then confirm the entry.

Confirm Enter the number

When the key number is accepted, playback starts and the BONUS indicator goes off.

•If playback does not start, enter correct key number again.

To clear the key number entry

Selecting browsable still pictures

While playing back a track linked to browsable still pictures (B.S.P), you can select the still pictures (turn the page).

•If a track is linked to browsable still pictures, they are usually shown automatically during playback.

Select the desired still picture.

20