JVC TH-M42 English, Getting started, Connecting the satellite front, center, surround speakers

English

Getting started

7Connecting the satellite (front, center, surround) speakers

Be sure to identify each speaker (SP-THM45C/SP-THM45F/SP-THM45S) and connect them to the corresponding terminals of the powered subwoofer.

CAUTION

•When you connect (larger) speakers other than the supplied ones, only use speakers with the same speaker impedance (SPEAKER IMPEDANCE) as indicated by the speaker terminals on the rear of the powered subwoofer.

•DO NOT connect more than one speaker to one speaker terminal.

Front speakers (SP-THM45F)

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Center speaker (SP-THM45C)

Surround speakers

(SP-THM45S)

Press and hold	Insert the bare end of the	Release the
the clamp.	speaker cord into the	clamp.
	terminal.

•Connect the white cords to the red (ª) terminals and black cords to the black (·) terminals.

Powered subwoofer

White

Black

Red

Black

CAUTION

When installing the satellite speakers on the wall;

•Be sure to have them installed on the wall by a qualified personnel.

DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

11