JVC TH-S3 Operating the VCR, Slide the remote control mode selector to VCR, Press and hold VCR

Operating external components with the remote control

See page 11 for button locations.

Operating the VCR

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a VCR; Set the remote control mode selector to VCR.

The following buttons are available:

2

VCR:Turns VCR on and off.

VCR

Press and hold VCR.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
Manufacturer	Code	Manufacturer	Code
JVC	01, 02, 03	Philips	09
Emerson	11, 26	RCA	05, 06
Fisher	29	Samsung	24
Funai	10, 14-16	Sanyo	21-23
Gold Star	12	Sharp	27, 28
Hitachi	04	Shintom	30
Mitsubishi	13	Sony	18-20
NEC	25	Zenith	08
Panasonic	07, 17

5 Release VCR.

If there is more than one code listed for your brand, try each one until you enter the correct one.

3(play button):Starts playback. 7:Stops operation.

8:Pauses playback.

¡:Fast forwards video tape.

1:Rewinds video tape.

REC:Press this button together with 3 (play button) to start recording or together with 8 to pause recording. CHANNEL +/–:Changes the TV channels on the VCR.

12