JVC TK-C625 manual Auto PAN Setup, Select camera. ARM-P2580AINSTRUCTIONSB

38 Setting Up the Camera Using RM-P2580 (continued)

EN

AUTO PAN Setup

			Gradual Rotation
		of	Image	of
Image			end
star	t	position	position

MENU button
	SET button						PAN lever
		CAMERA button
						REMOTE CONTROL UNIT RM-P2580
SETUP		CAMERA			POSITION
		POWER
MENU	SET	ALARM				AUTO	F-1	F-2	F-3
		KEY LOCK
	LENS		CAMERA/POSITION					PAN/TILT
	SPEED	1	2	3	CAMERA	POSI-
						TION

CLOSE	IRIS	OPEN	4	5	6	OPTION	OPTION
						1	2
NEAR	FOCUS	FAR	7	8	9	AUTO	AUTO
	AF
						PAN	PATROL
WIDE	ZOOM	TELE	CLEAR	0	ENTER
				/HOME

Numeric ENTER AUTO PAN

keys button button

ZOOM button

This section describes procedures for setting the Auto Pan function, which enables gradual horizontal rotation of the camera. There are 3 Auto Pan modes, namely movement between 2 points, rightward rotation and leftward rotation.

1Select camera. (ARM-P2580AINSTRUCTIONSB)

CAMERA buttonNNumeric key (Camera Number)NENTER button

●Video images of the selected camera will be output.

2Display the MENU screen. (A pg. 21, steps 2 to 4)

MENU button (3 sec.) N Select ACAMERA..B using the PAN lever NSET button.

●The AMENUB screen will be displayed.

3Move the PAN lever upward/downward to shift the cursor (E) to the AAUTO PAN/PATROL/TRACE..B item, followed by pressing the SET button.

●The AAUTO PAN/PATROL/TRACEB screen will be displayed.

4Press the SET button.

●Check that the cursor is at the AAUTO PAN SET..B item and press SET button.

5Set the AUTO PAN MODE and AUTO PAN SPEED.

●Set the type of Auto Pan movement using the AUTO PAN MODE item. RETURN (Movement between 2 points), RIGHT and LEFT

●Set the rotating speed of Auto Pan using the AUTO PAN SPEED item.

LOW, NORMAL, HIGH

6Shift the cursor (E) to the AA. PAN POS. SET..B item, and press the SET button (only when in the Return mode).

FOCUS button

AUTO PAN / PATROL / TRACE

AUTO PAN SET..

AUTO PATROL SET..

AUTO TRACE SET..

AUTO PAN / TRACE VIDEO ..

RM . A . PAN KEY	A . PAN
RM . A . PATROL KEY	A . PATROL

<MENU> RETURN <SET> SUB MENU

AUTO PAN/PATROL/TRACE screen

●The AAUTO PAN POSITION SETB screen will be displayed.

7 Adjust the angle of view at the start position (only when in the RETURN mode).

●Use the PAN lever, FOCUS button and ZOOM button for adjustment.

●Tilting operations or lens operations such as focusing and zooming are not possible at the return position.

●During setting, a message indicating A[START] POS.SET NB will be displayed at the bottom left of the screen.

8 Press the SET button (only when in the RETURN mode). This switches the start position to the end position.

9 Set the end position (only when in the RETURN mode).

●Set the return position using the PAN lever.

●During setting, a message indicating AO [END] POS.SETB will be displayed at the bottom right of the screen.

AUTO PAN SET
AUTO PAN MODE	RETURN
AUTO PAN SPEED	NORMAL
A . PAN POS . SET..

<MENU> RETURN

AUTO PAN SET screen

AUTO PAN POSITION SET

[START] POS.SET →

<SET> INVALID

DURING PAN MOVEMENT

<MENU> RETURN <SET> L / R

10Press the MENU button.

The Auto Pan position that has been set will be stored and the screen will return to the previous menu (AAUTO PAN SETB screen).

MEMO

●Vertical movement (tilting) and lens operations are not possible at the return position.

●Writing of preset data may fail if the SET button or MENU button is pressed when the camera is moving. Ensure that the camera has come to a stop before pressing the SET button and MENU button.

●The Manual Pan Limit mode will be temporarily turned OFF when this menu is displayed. Manual Pan Limit can be set upon exiting this menu without affecting the Auto Pan operation.

To enable Auto Pan operation upon setting, press the AUTO PAN button on RM-P2580.

ARM-P2580 "Auto Pan operation", INSTRUCTIONS

AUTO PAN POSITION SET screen