Important Safety Information
Warning and Operating Notes
Installation and serving the camera should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty.
WARNING! | The use of CSA certified/UL Listed Class 2 power adapters are required to ensure |
| compliance. |
| Note: |
| This product is intended to be supplied by a Listed Direct |
| "Class 2" or Listed Adapter marked "L.P.S." (or "Limited Power Source") and rated |
| output DC 12V, 0.58A minimum or AC 24V, 60Hz, 0.58A minimum. (for USA) |
WARNING! | To reduce the risk of fire or electric shock, do not expose the product to rain or |
| moisture. |
| Connect only one camera to the power line, | |
Caution | AC24V/DC12V.Do not share the power line with other | |
equipment. The power cable between power source and | ||
| ||
| the camera must be under 3 m. |
Operating Notes
Power Supply: This bullet camera can operate on AC 24V or DC 12V.
Connectors and field wiring terminals for external Class 2 Note circuits provided with marking indicating minimum Class of wiring to be used. Class 2 shall be marked adjacent to the
field wiring terminals.
Operating Conditions
yAvoid viewing very bright objects (example, light fixtures) for extended periods.
yAvoid operating or storing the unit in the following locations:
-Extremely humid, dusty, hot, cold environments (where the operating temperature is outside the recommended range of 14°F to 122°F
-Close to sources of powerful radio or TV transmitters
-Close to fluorescent lamps or objects reflecting light
-Under unstable light sources (may cause flickering)
2
