JVC TM-2000SU manual How To Initialize The Setting, Press the Power Switch to turn the power OFF

HOW TO INITIALIZE THE

SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the Power ( ) Switch to turn the power OFF (—).

ON

OFF

POWER

2.While pressing both MENU button and PHASE ( ) buttons, press the Power ( ) switch to turn the

power ON (_).

The <SET-UP MENU> RESET screen is displayed.

ON Note:

OFF

POWER

PHASE MENUThe <SET-UP MENU> RESET screen will not be displayed if the MENU or PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears.

3. Setting

Initialization is required.

		Press the CONTRAST ( ) button.
CONTRAST		* When initialization is completed, and the <SET-UP
		MENU> RESET screen disappears.
Initialization is not required.
–	+	Press the VOLUME/SELECT [+] or [–] button.
		* Initialization is aborted, and the <SET-UP MENU>
VOLUME/SELECT		RESET screen disappears.

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are	you	sure ?
“Yes”	then	<CONTRAST>
“No”	then	<+> or <–>

Initial settings

Sorts		(setting)
	Functions (Items)	Initialization
screen	SHARPNESS	00
	COLOR TEMP.	6500
<MENU>	COLOR SYSTEM	AUTO
	BRIGHTNESS P.S.	OFF
	ASPECT RATIO	4–3
	H. POSITION	00
screen	V. POSITION	00
	R. CUT OFF	00
MENU>	WHITE BALANCE
	R. DRIVE	00
	G. CUT OFF	00
	B. CUT OFF	00
UP	G. DRIVE	00
<SET-	B. DRIVE	00
	CONTROL LOCK	OFF
	B.P.S. LEVEL	10
	REMOTE SELECT	00
adjustment	PHASE	00
	CHROMA	00
Picture	CONTRAST	00
	BRIGHT	00
Volume	VOLUME	20

10