HOW TO HANDLE BASIC OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
| _ON : Power turns ON. (Power indicator: lit) |
ON | |
OFF |
POWER
2. Press the INPUT SELECT button to choose input.
Color system indication (PAL or NTSC)
NTSC
BA
INPUTSELECT
Selects video/audio signals input to terminals on the rear panel.
INPUT | Terminals on the rear panel | ||
SELECT |
|
| |
Video signal input | Audio signal input | ||
button | |||
1 Input A | VIDEO A terminal | AUDIO A terminal | |
(VIDEO) | |||
|
|
| |
2 Input B | VIDEO B terminal |
| |
(VIDEO) | AUDIO B terminal | ||
|
| ||
3 Input B | VIDEO B (Y/C) terminal | ||
| |||
(Y/C) |
| ||
|
| ||
|
|
| |
With regard to Color system indication
With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.
It does not appear when receiving B/ W signal or when no signal is input. See page 7 for COLOR SYSTEM setting.
00 ~ 50
3.Press the VOLUME/SELECT button to adjust the speaker volume.
– | + | Press this button to display the speaker volume level on the | ||
|
|
|
| screen. |
| VOLUME/SELECT |
| + : The | |
|
| |||
|
|
| ||
–:The
operating.
PICTURE ADJUSTMENT
1. Press select button corresponding to the item you
want to adjust. | The item you select is displayed on the screen. | ||
| 1 | PHASE ( | ) : Phase control |
| 2 | CHROMA ( | ) : Chroma control |
PHASE CHROMA | BRIGHT CONTRAST | 3 BRIGHT ( ) : Brightness control |
| |
|
| 4 CONTRAST ( ) : Contrast control |
| |
2. Adjust with the VOLUME/SELECT button. |
| |||
– | + | Items | VOLUME/SELECT button | |
|
| – | + | |
|
|
| ||
VOLUME/SELECT | PHASE | reddish | greenish | |
|
| |||
|
| (Phase) | ||
|
|
|
| |
|
| CHROMA | lighter | deeper |
|
| (Chroma) | ||
|
|
|
| |
|
| BRIGHT | darker | brighter |
|
| (Brightness) | ||
|
|
|
| |
|
| CONTRAST | lower | higher |
|
| (Contrast) | ||
|
|
|
| |
*Screen indication will disappear about 10 seconds after operating.
VOLUME : 20
– | + |
PHASE : 00
– | + |
Notes:
Phase control is effective only in the NTSC color system mode.
Chroma control is not effective when receiving B/W or when no signal is input.
When the Chroma control is set to level "
"NO EFFECT" is displayed (For about 3 seconds) when your selected
function has no effect.
6
