JVC TM-1600SU, TM-2000SU manual Rear View

REAR VIEW

<Rear Panel>

A	IN	OUT
	IN	OUT
VIDEO
B IN
		Y/ C
	OUT
A	IN	OUT
AUDIO
B	IN	OUT
REMOTE	IN	OUT

A

VIDEO

B

A

AUDIO

B

REMOTE

To AC outlet

(120 V AC, 50/60 Hz)

(Rear view of TM-2000SU shown)

16 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding video signals, use the VIDEO A terminal ^.

*Also refer to the Basic connection Example on pages 11 and 12.

Notes:

*For corresponding audio signals, use the AUDIO A terminals (.

*Also refer to the Basic connection Example on pages 11 and 12.

17 Video B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals ).

*Also refer to the Basic connection Example on pages 11 and 12.

18 Video B (Y/C) terminals [VIDEO B Y/C IN/ OUT]

Y/C (S-Video) signal input (IN) and output (OUT) termi- nals.

The output terminal is bridge-connected.

IN : Y/C-separated (S-video) signal input terminal

OUT : Bridge-connected Y/C-separated (S-video) signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals ).

*Also refer to the Basic connection Example on pages 11 and 12.

19 Audio A terminal [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal corresponding the VIDEO A terminals ^. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

20 Audio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals & or VIDEO B (Y/ C) terminals *. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO B terminals & or VIDEO B (Y/C) terminals *.

*Also refer to the Basic connection Example on pages 11 and 12.

21 Remote terminals [REMOTE IN/OUT]

Input (IN) and output (OUT) terminals for external control. The output terminal is bridge-connected. External control is available either to select the ASPECT RATIO or to select ON or OFF in BRIGHTNESS P.S. function mode. Set the external control in the <SET-UP MENU> screen mode.

External control	External control switch
	Open circuit	Short circuit
functions
	(open)	(short)
ASPECT RATIO	4–3 (4:3)	16–9 (16:9)
BRIGHTNESS P.S.	OFF	ON

Note:

*Also refer to the Basic connection Example on pages 11 and 12.

22 AC Inlet [AC IN]

Power input connector. Connect the provided AC power cord e to an AC outlet (120 V AC, 50/60 Hz).

23 Power cord

Connects the provided power cord (120 V AC, 50/60 Hz) to the AC IN connector.

5