JVC TM-1600SU, TM-2000SU manual How To Use The Menu Functions, Press the MENU button to quit

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING)

You can set the following menu items.

Set them depending on your needs.

• SHARPNESS	• ASPECT RATIO
• COLOR TEMP.	• BRIGHTNESS P.S.
• COLOR SYSTEM

1. Press the MENU button.

The <MENU> screen is displayed.

MENU

2.Press the PHASE ( ) or CHROMA ( ) button to select MENU items.

	A selection mark (3) is put next to the selected item.
PHASE CHROMA	Front panel		Function	Contents
	button		displayed
SHARPNESS
COLOR TEMP.	PHASE (	)	∞	Advance selection mark (3)
COLOR SYSTEM	CHROMA (	)	5	Reverse selection mark (3)

ASPECT RATIO

BRIGHTNESS P.S.

3. Press the VOLUME/SELECT button to set.

–

+

Front panel

Function

Contents

button

displayed

VOLUME/SELECT

VOLUME/

+

Increase (to max. value)

SELECT (+)

3

Advance the setting value

VOLUME/

–

Decrease (to min. value)

SELECT (–)

2

Reverse the setting value

Menu items

Purpose

Setting range

SHARPNESS

Picture sharpness

00

+1

+2

+3

+4

+5

COLOR TEMP.

Color temperature of

6500

9300

white balance

COLOR

Color system

AUTO

NTSC

AUTO

PAL

SYSTEM

ASPECT RATIO

Aspect ratio

4 – 3

16 – 9

BRIGHTNESS

Brightness Peak

OFF

ON

P.S.

Suppressor function

*Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good, set it to the exclusive mode (NTSC or PAL) corresponding to the received color system.

4.If you want to set the other menu items, repeat procedures 2 and 3.

5.Press the MENU button to quit.

Front panel	Function	Contents
button	displayed
MENU
MENU	EXIT	Quit (or Release) the <MENU>
		screen

<MENU> screen

1			< MENU >
	‰	SHARPNESS			: 00
		COLOR TEMP.			: 6500
		COLOR SYSTEM				: AUTO
		ASPECT		RATIO		: 4–3
2		BRIGHTNESS P.S.				:	OFF	3
			EXIT		4

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the

menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed.

Function	Contens
displayed
∞	Advance the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Advance the setting value.
2	Reverse the setting value.
EXIT	Exits the <MENU> screen.

Notes:

BRIGHTNESS P.S. (or B.P.S.) stands for Brightness Peak Suppressor. This function is used to suppress (cut) the white peak portion of the picture, so as to reduce the picture's burning on the screen (cathode ray tube).

When the BRIGHTNESS P.S. (or B.P.S.) function is ON, the suppressed white peak portion (for example, the lit part of a fluorescent lamp) seems to be blurred.

If required, lower the setting for the B.P.S. LEVEL in the <SET- UP MENU> screen mode, or turn off the BRIGHTNESS P.S. function.

When the screen aspect ratio is set to 16-9 (16:9) the picture will be vertically reduced. When setting value of ASPECT RATIO or BRIGHTNESS P.S. is set to REMOTE, REMOTE SELECT is activated in the <SET- UP MENU> mode, change the setting in this case. When required, use the external control function or turn off the REMOTE SELECT setting.

7