JVC TM-2100PN manual Display and Selections in the SET-UP Menu Mode Setting

HOW TO USE THE MENU FUNCTIONS (cont’d)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

• H. POSITION	• WHITE BALANCE	• B.P.S. LEVEL
• V. POSITION	• CONTROL LOCK	• REMOTE SELECT

Notes:

●Parameters for H. POSITION and V. POSITION can be set separately depending on the video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

●WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature value.

Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.

1. While pressing the MENU button, press the

PHASE ( ) button.

The <SET-UP MENU> screen is displayed.

PHASE MENU

2. Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item.

	A selection mark (3) is put next to the selected item.
PHASE CHROMA	Front panel		Function	Contents
	button		displayed
H. POSITION	PHASE (	)	▼	Forwards selection mark (3)
V. POSITION	CHROMA (	)	5	Reverses selection mark (3)
WHITE BALANCE

CONTROL LOCK

B.P.S. LEVEL

REMOTE SELECT

3. Press the VOLUME/SELECT buttons to set.

–		+	Front panel	Function	Contents
			button	displayed
	VOLUME/SELECT		VOLUME/	+	Increases (to max. value)
				3	Forwards the setting value
			SELECT (+)
				CUTO	Selects CUT OFF setting
					screen
			VOLUME/	–	Decreases (to min. value)
				2	Reverses the setting value
			SELECT (–)
				DRV	Selects DRIVE setting screen

Note:

●For the WHITE BALANCE setting, select the CUT OFF or DRIVE setting screen, then select the buttons (PHASE/ CHROMA/BRIGHT) corresponding to the function indicated (R/G/B).

<SET-UP MENU> screen

1			<SET–UP MENU>
	‰	H. POSITION			:			00
		V. POSITION			:			00
		WHITE BALANCE
		CONTROL LOCK				: OFF
		B. P. S. LEVEL			:			10
2		REMOTE SELECT				:	OFF		3
				EXIT				4

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the

menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed.

Function	Contens
displayed
▼	Forwards the menu item
5	Reverses the menu item
–	Lowers the adjustment
	value (to the minimum)
+	Raises the adjustment
	value (to the maximum)
3	Forwards the setting value
2	Reverses the setting value
EXIT	Exits the <SET-UP MENU>
	screen (release)
DRV	Selects DRV adjustment
CUTO	Selects CUT OFF
	adjustment
R	Adjusts red signal level
G	Adjusts green signal level
B	Adjusts blue signal level
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only in
	the DRIVE or CUT OFF
	adjustment mode.)

8

LCT0053-002A-H (EN) 8 02.07.30, 2:46 PM