JVC TM-2100PN manual Rear View

REAR VIEW

<Rear Panel>

A IN		OUT	16
	IN	OUT	17
VIDEO
B IN
		Y/ C	18
	OUT
A	IN	OUT	19
AUDIO			20
B	IN	OUT
REMOTE	IN	OUT	21

16 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

	A
	VIDEO
	B
	A
	AUDIO
	B
	REMOTE
To AC outlet	22

(230 V AC, 50 Hz/60 Hz)

23

Notes:

*For corresponding video signals, use the VIDEO A terminal ^.

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

Notes:

*For corresponding audio signals, use the AUDIO A terminals (.

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

17 Video B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals ).

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

18 Video B (Y/C) terminals [VIDEO B Y/C IN/ OUT]

Y/C (S-Video) signal input (IN) and output (OUT) termi- nals.

The output terminal is bridge-connected.

IN : Y/C-separated (S-video) signal input terminal

OUT : Bridge-connected Y/C-separated (S-video) signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals ).

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

19 Audio A terminal [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal corresponding the VIDEO A terminals ^. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

20 Audio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals & or VIDEO B (Y/ C) terminals *. The output terminal is bridge-connected. IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO B terminals & or VIDEO B (Y/C) terminals *.

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

21 Remote terminals [REMOTE IN/OUT]

Input (IN) and output (OUT) terminals for external control. The output terminal is bridge-connected. External control is available either to select the ASPECT RATIO or to select ON or OFF in BRIGHTNESS P.S. function mode. Set the external control in the <SET-UP MENU> screen mode.

External control	External control switch
functions	Open circuit	Short circuit
	(open)	(short)
ASPECT RATIO	4–3 (4:3)	16–9 (16:9)
BRIGHTNESS P.S.	OFF	ON

Note:

*Also refer to the BASIC CONNECTION EXAMPLE on pages 11 and 12.

22 AC Inlet [AC IN]

Power input connector. Connect the provided AC power cord e to an AC outlet (230 V AC, 50 Hz/60 Hz).

23 Power cord

Connects the provided power cord (230 V AC, 50 Hz/ 60 Hz) to the AC IN connector.

ENGLISH

5

LCT0053-002A-H (EN) 5 02.07.30, 2:45 PM