Specifications, Part Numbers, and Accessories
Specifications
Audio
Voltage gain |
|
XPA 1002 | 16x (24 dB) |
XPA | 57x (35 dB) |
XPA | 81x (38 dB) |
Stereo channel separation | >75 dB @ 1 kHz |
CMRR | 75 dB @ 1 kHz (typical) |
Audio input
Number/signal type | 1 stereo or 2 mono, |
| balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw |
| connector, 5 pole |
Impedance | >10k ohms unbalanced/ |
| balanced, DC coupled |
Nominal level | +4 dBu (1.23 Vrms), |
| balanced |
Maximum level | +20 dBu (7.75 Vrms), |
| balanced |
Input sensitivity |
|
XPA 1002 | +4 dBu (1.23 Vrms) |
XPA
+4 dBu (1.23 Vrms) if driven by one input
N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type |
|
XPA 1002 | 1 stereo, 4- or |
XPA | 1 mono, 70 V line |
XPA | 1 mono, 100 V line |
Connectors |
|
XPA 1002 | (1) 5 mm screw lock captive |
| screw connector, 4 pole |
XPA
(1)5 mm screw lock captive screw connector, 2 pole
Minimum load impedance |
|
XPA 1002 | 4 ohms |
XPA | 50 ohms |
XPA | 100 ohms |
Amplifier type | Class D |
Output power |
|
XPA 1002 | 60 watts rms per channel, |
| 8 ohms, 1 kHz, <0.05% THD |
| 100 watts rms per channel, |
| 4 ohms, 1 kHz, <0.05% THD |
XPA | 200 watts rms, 70 V, |
| 1 kHz, <0.1% THD |
XPA | 200 watts rms, 100 V, |
| 1 kHz, <0.1% THD |
Frequency response | 20 Hz to 20 kHz, ±1 dB |
THD + Noise |
|
XPA 1002 | 0.05% @ 20 |
| 8 ohms, at 3 dB below |
| clipping |
XPA | |
| <0.1% @ 1 kHz at 3 dB |
| below clipping |
S/N | >100 dB |
Damping factor |
|
XPA 1002 | >100 @ 8 ohms |
High pass filter |
|
XPA
| 80 Hz, 12 dB per octave |
| rolloff (switch selectable) |
Control/remote — amplifier | |
Control port | (1) 3.5 mm captive screw |
| connector, 5 pole |
Pin configurations
DC volume control (analog) Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/ mute (variable voltage), pin 3 = GND
Volume control voltage range
0 V (mute) to 10 V (maximum volume)
Standby power control (contact closure) Pin 4 = GND, pin 5 = standby
XTRA Series • Reference | XTRA Series • Reference |