JVC TM-A13SU-W, TM-A13UCV manual HOW to Handle Basic Operations, Picture Adjustment

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the POWER switch to turn on the power.

		_ON : Power turns ON. (Power indicator: lit)
	ON	—OFF :Power turns OFF. (Power indicator: unlit)
	OFF
POWER

2. Press the INPUT SELECT button to choose input.

Selects video/audio signals input to terminals on the rear panel.

B		A
			INPUT	Terminals on the rear panel
			SELECT
	INPUTSELECT		button	Video signal input	Audio signal input
			1 Input A	VIDEO A terminal	AUDIO A terminal
			2 Input B	VIDEO B terminal	AUDIO B terminal

*Audio signal input is not available on the TM-A13UCV.

3.Press the VOLUME/SELECT button to adjust the speaker volume.

(Audio is only available on the TM-A13SU and TM-A13SU-W.)

–	+	Press this button to display the speaker volume level on the
		screen.
VOLUME/SELECT		+ : The Built-in speaker volume is increased. (00 = 50)

–:The Built-in speaker volume is decreased. (50 = 00)

(TM-A13SU / TM-A13SU-W)	* Screen indication will disappear about 10 seconds after
	operating.

Color system indication (NTSC or PAL )

NTSC

With regard to Color system indication

With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.

It does not appear when receiving B/ W signal or when no signal is input. See page 7 for COLOR SYSTEM setting.

00 ~ 50

VOLUME : 20

–

+

PICTURE ADJUSTMENT

1. Press select button corresponding to the item you

want to adjust.	The item you select is displayed on the screen.
	1 PHASE ( ) : Phase control

2CHROMA ( ) : Chroma control

PHASE CHROMA BRIGHT CONTRAST	3	BRIGHT ( ) : Brightness control
	4	CONTRAST ( ) : Contrast control

–20 ~ +20

2.Adjust with the VOLUME/SELECT or the SELECT button.

		Items	VOLUME/SELECT button
–	+		–	+
		PHASE	reddish	greenish
VOLUME/SELECT		(Phase)
(TM-A13SU / TM-A13SU-W)		CHROMA	lighter	deeper
		(Chroma)
–	+
		BRIGHT
			darker	brighter
		(Brightness)
	SELECT	CONTRAST
(TM-A13UCV)			lower	higher
		(Contrast)

*Screen indication will disappear about 10 seconds after operating.

PHASE : 00

– +

Notes:

Phase control is effective only in the NTSC color system mode.

Chroma control is not effective when receiving B/W or when no signal is input.

When the Chroma control is set to level " –20", the picture turns monochrome.

"NO EFFECT" is displayed (For about 3 seconds) when your selected

function has no effect.

6