JVC TM-A13SU manual HOW to USE the Menu, Display and Selections in the SET-UP Menu Mode Setting

HOW TO USE THE MENU

FUNCTIONS (cont'd)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

H. POSITION WHITE BALANCE CONTROL LOCK

Note:

Parameters for H. POSITION can be set separately depending on the video input (Input A or Input B) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

<SET-UP MENU> screen

1	<SET–UP MENU>
	‰ H. POSITION	: 00
	WHITE BALANCE
	CONTROL LOCK	: OFF
2		3
	EXIT	4

1. While pressing the MENU button, press the

PHASE ( ) button.

The <SET-UP MENU> screen is displayed.

PHASE MENU

2. Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item.

	A selection mark (3) is put next to the selected item.
	Front panel		Function	Contents
PHASE CHROMA	button		displayed
H. POSITION	PHASE (	)	▼	Advance selection mark (3)
WHITE BALANCE	CHROMA (	)	5	Reverse selection mark (2)
CONTROL LOCK

3. Press the VOLUME/SELECT or the SELECT button

to set.				Front panel	Function	Contents
	–		+	button	displayed
				VOLUME/	+	Increase (to max. value)
	VOLUME/SELECT				3	Advance the setting value
				SELECT (+) or
(TM-A13SU / TM-A13SU-W)					CUTO	Selects CUT OFF setting
				SELECT (+)
	–		+			screen
VOLUME/				–	Decrease (to min. value)
					2	Reverse the setting value
		SELECT		SELECT (–) or
				SELECT (–)	DRV	Selects DRIVE setting screen
(TM-A13UCV)
				Notes:
				For the WHITE BALANCE setting, select the CUT OFF or
				DRIVE setting screen, then select the buttons (PHASE/
				CHROMA/BRIGHT) corresponding to the function indicated
				(R/G/B).
				To return to the <SET-UP MENU> screen, press the EXIT
				(MENU) button.

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed.

Function	Contens
displayed
▼	Advance the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Advance the setting value.
2	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen (release)
DRV	Selects DRV adjustment
CUTO	Selects CUT OFF
	adjustment
R	Adjusts red signal level
G	Adjusts green signal level
B	Adjusts blue signal level
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only in
	the DRIVE or CUT OFF
	adjustment mode.)

8