JVC TM-H1950CG HOW to Initialize the Setting,  Initialization is required, Initial settings

HOW TO INITIALIZE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the Power () switch to turn the power OFF (activate the standby mode).

POWER

2.While pressing both MENU button and CHROMA/ PHASE button, press the Power () switch to turn the power ON.

CHROMA MENU	The <SET-UP MENU> RESET screen is displayed.
	POWER
PHASE	Note:

●The <SET-UP MENU> RESET screen will not be displayed if the MENU or CHROMA/PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears.

3.Setting

Initialization is required.

VOLUME/SELECT Press the VOLUME/SELECT [+] button.

*Initialization is completed, and the <SET-UP MENU> RESET screen disappears.

Initialization is not required.

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are you sure ? “Yes” then <+> “No” then <MENU>

Initial settings

Sorts	Functions (Items)	Initialization
		(setting)
screen	APERTURE	00
	ADJ. BAR POSI	LOWER
	COLOR TEMP	6500
<MENU>
	COLOR SYSTEM	AUTO
	COMPO. LEVEL	00
	RUSH DELAY	STD.
	PICTURE SUB ADJ.
	CONTRAST	00
	BRIGHT	00
screen	CHROMA	00
	PHASE	00
	H. POSITION	00
	V. POSITION	00
MENU>
	WHITE BALANCE
	R. CUT OFF	00
	G. CUT OFF	00
UP
	B. CUT OFF	00
<SET-	R. DRIVE	00
	B. DRIVE	00
	CONTROL LOCK	OFF
	STATUS DISPLAY	ON
	REMOTE SYSTEM	MAKE
	INPUT REMOTE	A – D

ENGLISH

MENU

Press the MENU button.

* Initialization is aborted, and the <SET-UP MENU> RESET screen disappears.

adjustment	CHROMA	00
	PHASE	00
	CONTRAST	00
Picture	BRIGHT	00
Volume	VOLUME	20

15