CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG)
G / Y
INOUT
INOUT
INOUT
HD/CS
INOUT
VD
INOUT
AUDIO
IN 
OUT
1
2
3
4
1 Video input/output terminals
Input (IN) and output (OUT) terminals for component (color deference) or RGB signals.
The IN and OUT terminals are
Select component signal : press INPUT SELECT C button
Select RGB signal : press INPUT SELECT D button
2 Synchronized signal input/output terminals Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronized signals.
External sync is available with RGB input only. The IN and OUT terminals are
G on SYNC cannot be used with RGB input.
3 Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are
4 Connection terminal (to a Color Video Monitor)
Attach to the connection terminal of your color video monitor.
ENGLISH
SDI INPUT CARD (OPTIONAL: IF-C01SDG)
| SWITCHED |
| OUT |
IN | SDI 1 |
IN | SDI 2 |
AUDIO1
IN OUT
AUDIO2
Note:
1
2
3
4
1 Output terminal for a selected component serial digital signal
Output terminal for a selected digital signal (the input displayed on the screen). The output signal is cable- compensated.
NOTE: When the monitor’s main power is OFF, no digital signal is output.
In the standby mode, the signal from the SDI 1 terminal is output.
2 Input terminals for component serial digital signals
Input terminals for the digital signal.
Select SDI 1 : press INPUT SELECT C button
Select SDI 2 : press INPUT SELECT D button
3 Audio input/output terminals
Input (IN) and output (OUT) terminals for the analog signals corresponding to SDI 1 and SDI 2.
NOTE: This input card cannot decode audio data even if contained in the input digital signal.
●The optional input cards shown below cannot be used. Using any of these cards will void your warranty and may result in damage or malfunction.
*Video input card
4 Connection terminal (to a Color Video Monitor)
Attach to the connection terminal of your color video monitor.
7
