JVC TS-C50P2G Components, Points to note during installation, English, WalI-hangingbracket unit

Components

WalI-hanging bracket unit 1

Insulating spacer	Toothed pan washer
....................................4	....................................4

Allen key (accessory) 1

M5 screw 2

(Fixing screw)
Pan head bolt with
hex socket (M8-45)	4

English

Points to note during installation

•The wall-hanging bracket is for use in installing the Wide Plasma Display to a vertical wall for viewing purposes. Do not use it for any type of installation other than vertical wall installation.

•In order to ensure correct, problem-free operation of the Wide Plasma Display, do not install the Display in any of the following places.

•Places which are next to sprinklers or sensors

•Places which are subject to vibration or shocks

•Places which are close to high-voltage wires or electric motors

•Places in direct contact with air from heaters

•When installing this wall-hanging bracket unit, use a fixing method appropriate to the type of wall.

•Insert the power cord plug for the Wide Plasma Display into a wall outlet which is close and easily accessible.

•Provide adequate ventilation so that the temperature around the display does not rise above 40°C (104 F°). If there is insufficient movement of the air inside display, heat may build up inside the display, and fire may result.

9