JVC TV-13143W manual Antenna Connections, OHM Matching Transformer not included, Not included

ANTENNA CONNECTIONS

If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

75OHM COAXIAL CABLE

Connect the 75 ohm cable from the combination VHF/

UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

ANT ANT

300-75 OHM

MATCHING TRANSFORMER (not included)

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

300-75 OHM

MATCHING TRANSFORMER (not included)

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching trans- former. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

ANT
COMBINER
(not included)	UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

COMBINER (not included)

VHF 75 ohm

ANT

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner. Attach the combiner to the antenna jack.

UHF 300 ohm

11