DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape. Make all connections before turning on the power.
1 | Insert a blank cassette with the erase preven- |
tion tab intact into the TV/VCR. |
Insert a previously recorded cassette into the playback VCR or Camcorder.
2 | Press the INPUT button twice select AUDIO/ |
VIDEO input position, The "LINE" will appear on |
the screen.
INPUT
LINE
CONNECTION TO ANOTHER VCR
RECORDING TV/VCR
PLAYBACK VCR
VIDEO OUT AUDIO OUT
VIDEO IN 
AUDIO IN
AUDIO/VIDEO CORD (NOT SUPPLIED)
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown below.
RECORDING TV/VCR
PLAYBACK CAMCORDER
To AV Jack
AUDIO/VIDEO CORD (NOT SUPPLIED)
To VIDEO/AUDIO IN
Press the REC b utton and the
3 PLAY button simultaneously on the remote control or the
REC button on the TV/VCR, then press the P AUSE button.
REC | PLAY | PAUSE |
4 | Press the PLAY button on the |
playback VCR. |
PLAY
5 | Press the PAUSE button |
on the TV/VCR to begin |
the duplicating process.
PAUSE 
NOTE: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
•Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
46
