JVC UX-5000 manual Troubleshooting, English, Symptom, Possible Cause, Action

Models: UX-5000

1 21
Download 21 pages 28 Kb
Page 20
Image 20
■Troubleshooting

English

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Poor radio reception

The CD skips.

The CD does not play.

Unable to operate the Remote Control.

Operations are disabled.

Possible Cause

Connections are incorrect, or loose.

Headphones are connected.

The antenna is disconnected.

The AM Loop Antenna is too close to the System.

The FM Wire Antenna is not prop- erly extended and positioned.

The CD is dirty or scratched.

The CD is upside down.

The path between the Remote Con- trol and the sensor on the Unit is blocked

The batteries have lost their charge.

The built-in microprocessor has mal- functioned due to external electrical interference.

Action

Check all connections and make cor- rections. (See pages 4 - 5.)

Disconnect the headphones.

Reconnect the antenna securely.

Change the position and direction of the AM Loop Antenna.

Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

Put the CD in with the label side up.

Remove the obstruction.

Replace the batteries.

Unplug the System then plug it back in

16

Page 20
Image 20
JVC UX-5000 manual Troubleshooting, English, Symptom, Possible Cause, Action