Changing the Display Brightness

Remote

 

ONLY

—DIMMER

You can dim the display window.

DIMMERDIMMER-1DIMMER-2 DIM OFF

(Canceled)

DIMMER-1Dims the display illumination.

DIMMER-2Erases the display illumination.

Setting the Clock Remote

ONLY

Without setting the built-in clock, you cannot use the Daily Timer (see page 20).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.

REC

CLOCK /TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see page 21) is selected.

2Adjust the hour.

PRESET UP

SET

PRESET DOWN

3Adjust the minute.

PRESET UP

SET

PRESET DOWN

“CLOCK OK” appears and the built-in clock starts working.

To check the current time during play

DISPLAY

Clock

 

Source information

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the clock again.

Turning Off the Power

Remote

Automatically ONLY

To turn off the System after playback is over— Auto Standby

A.STANDBY

When Auto Standby is in use, the A.STANDBY indicator lights on the display.

REC

A.STANDBY

When the disc and tape playback stops, the A.STANDBY indicator starts flashing.

If no disc or tape operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.

• Auto Standby only works after disc and tape playback.

To turn off the System after a certain period of time—Sleep Timer

1Specify the time (in minutes).

SLEEP

10

20

30

60

90

120

 

OFF

(Canceled)

2Wait until the set time goes off.To check the time remaining until the shut-off time

SLEEP

REC

SLEEP

•If you press the button repeatedly, you can change the shut- off time.

14