Listening to the Radio

To select the AM tuner interval spacing

Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing.

If the received FM station is hard to listen

FM MODE/

MP3 MONO

STEREO

Remote

ONLY

You can change the AM tuner intervals while the System is on stand by.

1

2sec.

On the main unit

• Current interval setting appears on the display.

2Select the interval spacing while current setting appears on the display.

9

REC

 

10

REC

 

MONO: Reception will improve though stereo effect is lost. MONO indicator lights up.

STEREO: Normally select this. Stereo effect will be resumed.

To preset the stations

Remote

ONLY

 

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.
2Activate the preset number entry mode.

SET

REC

•Finish the following process while the indication on the display is flashing.

3Select a preset number for the station you store.

To select the band (FM or AM)

FM AM

1 2 3

4

5

6

7 8 9

10 10

Examples:

To select preset number 5, press 5.

To select preset number 15, press +10, then 5.

To select preset number 30, press +10, +10, then 10.

To tune in to a station

While FM or AM is selected...

Remote control:

Main unit:

 

1 sec.

 

1 sec.

 

DOWN

UP

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

•You can also use the PRESET UP/PRESET DOWN buttons.

4Store the station.

SET

REC

9