Warnings, Cautions and Others

CAUTION— (standby/on) button!

Disconnect the mains plug to shut the power off completely

(all lamps and indications go off). The button in any position does not disconnect the mains line.

When the unit is on standby, the STANDBY lamp lights in red.

When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE UNIT.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

 

1.

Front:

 

No obstructions and open spacing.

 

 

 

2.

Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

 

3.

Bottom:

 

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height

 

 

 

of 10 cm or more.

 

 

 

 

 

 

 

Front

 

 

1 cm

 

15 cm

 

Side

15 cm

 

 

 

 

 

 

 

1 cm

 

 

 

15 cm

 

15 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 cm

 

 

 

10 cm

SP-UXG5

CA-UXG5

SP-UXG5

CA-UXG5

About the cooling fan

A cooling fan is mounted on the rear panel of the unit to prevent abnormal temperature inside the unit, thus assuring normal operation of the unit. The cooling fan automatically starts rotating to intake external cool air when the volume is increased up to more than a certain level.

G-1