JVC UX-G5 Synchronized Disc Recording, To record the entire disc, AM broadcast, 4 Start recording, 4 Start recording, To stop recording:, To protect your recording

3 Select and start playing the source—“FM,” “AM,” “CD,” or “AUX IN.”

•When recording a disc, you can also use “Synchronized Disc Recording” (see below).

4 Start recording.

REC

On the main unit

To stop recording:

Synchronized Disc Recording

You can start and stop both disc play and tape recording at the same time.

To record the entire disc

1 Load a disc and insert a recordable cassette.

•If the current playing source is not the CD player, press CD 6, then 7.

2 Check the tape running direction and Reverse mode settings on the display.

• See step 2 of “Recording on a Tape” on page 18.

3 Select the disc number you want to start recording from.

CD	CD	CD	CD	CD
1	2	3	4	5
0	0	0	0	0
	On the main unit			On the main unit

4 Start recording.

REC

On the main unit

•If starting recording while playing back a disc, the disc player returns to the beginning of the current track.

To record Program Play or Random Play

1Select Program Play (and make a program) or Random Play.

2Press REC to start recording.

To protect your recording

Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording.

To protect your recording, remove these tabs.To re-record on a protected tape, cover the holes with

adhesive tape.

If the beat are heard while recording an	Remote
AM broadcast	ONLY

FM MODE/
MP3	BEAT 1

BEAT 2

• Select “BEAT 1” or “BEAT 2” to reduce the beat.

19