Manuals / Brands / Home Audio / Stereo System / JVC / Home Audio / Stereo System

JVC UX-G5 Step 3: HookUp, For better FM/AM reception, antenna, Outdoor FM, (not supplied), AM loop antenna, To a wall outlet, Vynile-coveredwire (not supplied)

1 29

Download 29 pages, 1.19 Mb

Step 3: Hook Up

If you need more detailed information, see page 6.

Illustrations of the input/output terminals below are typical examples.

When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary.

Turn the power off to all components before connections.

For better FM/AM reception

Outdoor FM	White		ANTENNA
Outdoor FM
antenna		AM
(not supplied)	AM	EXT
	AM
	LOOP
	LOOP
		GND

AM loop antenna

Keep it connected.

Vynile-covered wire (not supplied)

Extend it horizontally.

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector.

To a wall outletPlug the AC power cord only after all connections are complete.

• If the wall outlet does not match the AC plug, use the supplied AC plug adapter.

Contents

MICRO COMPONENT SYSTEM INSTRUCTIONS IMPORTANT FOR LASER PRODUCTS Contents Introduction Precautions Installation Power sources Moisture condensation Getting Started Step1: Unpack Step2: Prepare the RemoteControl Step 3: HookUp For better FM/AM reception FM antenna (supplied) AM loop antenna (supplied) Black stripe Non-stripe To assemble and connect the AM loop antenna To connect the speaker cords Adjusting the voltage selector Before Operating the System Daily Operations—Playback To turn off (stand by) the System To turn off the clock indication Listening to the Radio To select the AM tuner interval spacing To preset the stations To select the band (FM or AM) To tune in to a station PlayingBack a Disc To select a disc to be played back To select a track/group To locate a particular portion To insert a disc For MP3 playback PlayingBack a Tape To insert a tape To change the tape running direction To reverse the tape automatically PlayingBack OtherEquipment Daily Operations Adjusting the Volume Adjusting the Sound To emphasize the sound—SOUNDTURBO Settingthe ClockRemote TurningOff the Power AutomaticallyONLY To turn off the System after playback is over— Auto Standby To turn off the System after a certain period of time—SleepTimer Advanced Disc Operations Programmingthe Playing Order— ProgramPlay To check the programmed contents To modify the program Playingat Random—RandomPlay To exit from Random Play Playing Repeatedly—RepeatPlay ProhibitingDisc Ejection—ChildLock Advanced Tape Operations Recordingon a Tape Synchronized Disc Recording To record the entire disc Timer Operations Settingthe Timer How Daily Timer actually works How Recording Timer actually works To turn off the Timer after its setting is done Additional Information Learning More about This System Daily Operations—Playback (see pages 8 to 12) Daily Operations—Sound& Other Adjustments Advanced Disc Operations (see pages 15 to 17) Timer Operations To remove the speaker grilles Troubleshooting General: Radio Operations: Disc Operations: Tape Operations: Maintenance Handling discs Handling cassette tapes Cleaning the System Specifications Parts Index SYSTEM COMPONENT MICRO G5-UX