Listening to the Radio INFO
Main Unit
To select the band (FM or AM)
Remote control: | Main unit: |
| FM/AM |
To set the AM tuner interval spacing
ONLY
Before operating the tuner, it is required to select the appropriate AM space interval used for your area.
1Select the AM band.
FM/AM
FM AM
2Turn off the power.
3Select the appropriate AM space interval for your area.
•You can only use the button and the control on the front panel.
| FM |
FM AM | AM |
AUX
To tune in to a station
While FM or AM is selected...
Remote control: | Main unit: |
|
2 sec. |
| 2 sec. |
|
| |
GROUP/TITLE SKIP | DOWN | UP |
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.
•When you repeatedly press the button, the frequency changes step by step.
To stop searching manually, press either button.
DOWN
AM 9KHZ
(9 kHz interval)
While holding...
If the received FM station is hard to listen
REV.MODE
FM/PLAY MODE
Remote
ONLY
UP
AM 10KHZ
(10 kHz interval)
While holding...
The MONO indicator lights on the display. Reception will improve though stereo effect is
To preset the stations | Remote |
ONLY | |
|
You can preset 30 FM and 15 AM stations.
1Tune in to a station you want to preset.
•You can also store the monaural reception mode for FM preset stations if selected.
8