JVC UX-GD6M, UX-GD6S Settingthe Clock, Auto Standby, Sleep Timer, Clock, Source information, 10 20 30 60 90 120 150 Canceled

Setting the Clock	Remote	INFO
	ONLY

Turning Off the Power Automatically	Remote
	ONLY

Without setting the built-in clock, you cannot use Timers (see page 32) and Sleep Timer.

•To correct a misentry during the process, press CANCEL (while holding SHIFT) or CLOCK/TIMER. You can return to the previous step.

Auto Standby

A.STANDBY

3

On

1Activate the clock setting mode.

CLOCK/

TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Set the time.

• Adjust the hour, then the minute.

CANCEL

SET

Now the built-in clock starts working.

To check the current clock time during play

TV/VIDEO	Clock
DISPLAY

Source information

•While playing a DVD and MP3, you cannot check the clock time (other disc information appears).

Canceled

(at the same time)

When Auto Standby is in use, the A.STANDBY indicator lights on the display.

When disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.

Sleep Timer

You can set the shut-off time so that you can go to bed without turning it off yourself.

1Specify the time (in minutes).

SLEEP

2

(at the same time)

10 20 30 60 90 120 150 Canceled

2Wait until the set time goes off.

To check the time remaining until the shut-off time, press SLEEP while holding SHIFT.

•If you press the button repeatedly, you can change the shut- off time.

15