JVC UX-GD6M, UX-GD6S Changing the PictureTone, To select a preset picture tone, Adjusting the Audio Input Level, DIM1, DIM2, DIM OFF, AUTO DIM, NORMAL, USER2, AUX LVL1, AUX LVL2

Adjust if the picture is indistinct (–8 to +8).

SHARPNESS

Adjust if the human skin color is unnatural (–7 to +7).

TINT

Adjust if the picture is whitish or blackish (–7 to +7).

SATURATION

Adjust if the far and near positions are unnatural (–7 to +7).

CONTRAST

Adjust if the entire picture is bright or dark (–8 to +8).

BRIGHTNESS

Adjust if the neutral color is bright or dark (–3 to +3).

TV CH

GAMMA

Select a parameter you want to adjust.

TV CH

ENTER

2

To adjust the picture tone

1 Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained on the left column.

Changing the Display Brightness				Remote
				ONLY
You can dim the display window.
	DIMMER	DIM1		DIM2
	1
		DIM OFF	AUTO DIM
		(Canceled)
	(at the same time)
DIM1	Dims the display.
DIM2	Erases the display illumination.

AUTO DIM Erases the display illumination when disc playback starts.*

•The display illuminates when playback stops.

*“AUTO DIM” does not work for CD/MP3.

Changing the Picture Tone	Remote
	ONLY

•While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own taste.

To select a preset picture tone

1While playing, display VFP setting screen.

	NORMAL
VFP	GAMMA	0
	BRIGHTNESS	0
4
	CONTRAST	0
	SATURATION	0
	TINT	0
	SHARPNESS	0
(at the same time)	On the TV

2Select a preset picture tone.

	NORMAL	CINEMA
	USER2	USER1
NORMAL	Normally select this.
CINEMA	Suitable for a movie source.

USER1/USER2 You can adjust parameters and can store the settings.

To erase the screen, press VFP again while holding SHIFT.

14

3Adjust the parameter.

TV CH

ENTER

TV CH

4Repeat steps 2 to 3 to adjust other parameters.

To erase the screen, press VFP again while holding SHIFT.

Adjusting the Audio Input Level	Remote
	ONLY

If the sound from the component connected to the

AUX jack is too loud or is not loud enough when changing from another source to “AUX,” you can change the audio input level through the AUX jack (without changing the volume level).

While the “AUX” is selected as a source...

2sec.

CANCEL
SET	AUX LVL1

AUX LVL2

AUX LVL1 Select this when the sound is too loud (initial setting).

AUX LVL2 Select this when the sound is not loud enough.