Do not connect the AC power cord until all other connections have been made.
To remove the speaker grilles
The speaker grilles are removable as the illustration below.
HolesProjections
Speaker grille
To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you while holding the side.
Do the same for the rest of projections one at a time.
To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.
Connecting Other Equipment
To connect an audio equipment
You can connect audio
•DO NOT connect any equipment while the
power is on.
•DO NOT plug in any equipment until all connections are complete.
For playing other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX jack by using audio cords with mini plugs (not supplied).
To audio output
AUX
L 
R
When the audio equipment has pin jacks for audio output: Be sure that the pin plugs of the audio cords are colored— white plugs and jacks are for left audio signals, and red ones for right audio signals.
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
AC |
| AC |
|
|
|
|
|
|
VOLTAGE SELECTOR
Use a screwdriver to move the voltage selector so the voltage number is the same as the voltage where you are plugging in the unit. (See the back cover page.)
OR
To
Audio equipment
To audio output
7