Recording Discs
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1 Put a recordable cassette in with the exposed part of the tape down.
•See also page 15.
2 Close the cassette holder gently.
3 | Press CD ‹/8 to select the CD |
| CD | |||
| #/8 | |||||
|
|
| player as the source. |
|
| |
|
|
|
|
|
| |
|
|
| Press 7 to stop the disc |
|
|
|
4 |
| DOWN |
| UP | ||
|
|
|
| 4 | 7 | ¢ |
playback.
•You can make a program (see page
12)if you want.
5 Press REC (recording). | REC |
3 indicator lights up on the display.
REC
6 Press TAPE ¤ ‹. | TAPE |
“SYNC REC” appears and 3 indicator starts flashing slowly on the display.
CD playback and tape recording starts automatically.
REC
•If no cassette is inserted when you press REC “NO TAPE” appears on the display.
•If a protected tape is inserted when you press REC “PROTECT” appears on the display.
To stop recording for a moment, press REC. |
| REC | |
|
|
| |
Both the CD playback and tape recording are |
|
| |
paused. To resume recording, press TAPE ¤ ‹. |
|
| |
To stop recording, press 7. | 4 | 7 | ¢ |
| DOWN |
| UP |
The recording stops and the CD playback is paused.
To record on both
On the remote control ONLY:
Press REV.MODE (reverse mode) | REV.MODE | ||
|
|
| |
repeatedly until | or | is lit. |
|
•When using the Reverse Mode for Disc
Synchronized Recording, 
lights up and the recording starts in the forward ( 3 ) direction first. When the tape reaches its end, the CD playback is paused until the tape recording changes to the reverse direction, then the recording continues.
To cancel the Reverse Mode, press REV.MODE repeatedly
until 
is lit.
When making Sleep Timer settings while doing Disc Direct Recording
Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.
19