Playing Back Tapes

Playing Back a Tape

You can play back type I tapes only.

1

If no cassette is inserted when you press TAPE ¤ ‹

“NO TAPE” appears on the display.

UP

Press PUSH OPEN.

The cassette holder opens.

PUSH OPEN

2 Put a cassette in with the exposed part of the tape down.

To stop playing, press 7.

DOWN

4

To fast-wind to the left or to the right,

press ¢ or 4 (or UP ¢ or DOWN 4 on the unit).

The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display.

PRESET

GROUP

DOWN

PRESET

GROUP

UP

7¢

UP

PRESET

GROUP

DOWN

PRESET

GROUP

DOWN

 

UP

4

7

¢

To remove the cassette, press PUSH OPEN

PUSH OPEN

on the unit while playback is stopped.

 

3

Close the cassette holder gently.

To play both sides—Reverse Mode

 

You can set the deck to play just one side of a tape, both sides

 

 

 

 

once, or both sides continuously.

 

 

 

On the remote control ONLY:

 

 

 

Press REV.MODE (reverse mode).

REV.MODE

 

 

• Each time you press the button, the Reverse

 

 

 

Mode changes as follows:

 

•When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display.

4 Press TAPE ¤ ‹.

TAPE

Playback starts (if the unit has been on standby, the unit automatically turns on). The tape direction indicator ( 3 or 2 ) starts flashing slowly on the display.

•Each time you press the button, the tape direction changes:

3: plays the front side.

2: plays the reverse side.

When the tape plays to the end, the deck automatically

stops if the Reverse Mode is set to or . (See “To play both sides—Reverse Mode.”)

: The deck automatically stops after playing both sides of the tape. Stops when playback in the 2 directions are finished.

: The deck continues to play both sides of the tape 10 times, then stops playback automatically.

: The deck automatically stops after playing one side of the tape.

•DO NOT turn off the unit while playing back or

recording a tape. The cassette deck or tapes may be damaged.

•The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

•This unit is not compatible with type II and type IV tapes.

15