JVC UX-H350 Getting Started, Unpacking, Connecting AM and FM Antennas, Connecting Speakers, 2,3, terminal, AM LOOP terminal, 3Release your finger from the clamp

Getting Started	connections have been made.	Continued
	Do not connect the AC power cord until all other

Unpacking

After unpacking, check to be sure that you have all the following items.

The number in parentheses indicates the quantity of each piece supplied.

•AM loop antenna (1)

•AC plug adaptor (1)

•Remote control (1)

•Batteries (2)

If any item is missing, consult your dealer immediately.

Connecting AM and FM Antennas

1 AM loop antenna (supplied)

FM
ANTENNA
AM	2 FM antenna
LOOP

1Connect the supplied AM loop antenna to the

AM LOOP terminal.

Place the antenna away from the unit and adjust its position for the best reception.

2Adjust the position for the FM antenna for the best reception.

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals or connecting cords.

•Keep the antennas away from metallic parts of the unit,

connecting cords, and the AC power cord.

Connecting Speakers

You can connect the speakers using the speaker cords.

1 2,3

	Red
	Ò
	Black
	Â
Red
Speaker	Speaker
cord	cord
	Black

Right speaker Left speaker

1Hold the clamp of the speaker terminal.

2Insert the end of the speaker cord into the

terminal.

Match the polarity of the speaker terminals: red cord to

ªand black cord to ·.

3Release your finger from the clamp.

IMPORTANT:

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

•DO NOT connect more than one speaker to one speaker terminal.

6