JVC UX-P3 Getting Started, Supplied Accessories, Connecting Antennas, COAXIAL terminal, English

Getting Started	Continued
Supplied Accessories	Connecting Antennas

English

Make sure that you have all the following items.

The number in the parentheses indicates the quantity of the pieces supplied.

•AM loop antenna (1)

•FM antenna (1)

•Remote control (1)

•Batteries (2)

If anything is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

FM antenna

ANTENNA

EXT
AM	LOOP
75
FM
COAXIAL

FM antenna (supplied)

Insert the batteries — R6(SUM-3)/AA(15F) — into the	1	Attach the FM antenna to the FM 75 Ω
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery		COAXIAL terminal.
compartment.	2	Extend the FM antenna.
When the remote control can no longer operate the unit,

replace both batteries at the same time.

		3 Fasten it up in the position which gives you
1		the best reception, then fix it on the wall, etc.
			About the supplied FM antenna
		The FM antenna supplied with this unit can be used as temporary
		measure. If reception is poor, you can connect an outdoor FM
		antenna.
	R6(SUM-3)/AA(15F)	To connect an outdoor FM antenna
		Before connecting it, disconnect the supplied FM antenna.
	2
			Outdoor FM antenna
			(not supplied)
3
			Coaxial cable
			ANTENNA
			EXT
			AM		LOOP
•	DO NOT use an old battery together with a		FM	75
	new one.
			COAXIAL
•	DO NOT use different types of batteries
	together.
•	DO NOT expose batteries to heat or flame.
•	DO NOT leave the batteries in the battery
	compartment when you are not going to use	A 75	Ω antenna with coaxial type connector should be
	the remote control for an extended period of
		used.
	time. Otherwise, it will be damaged from
	battery leakage.
		– 6 –