JVC UX-P5/UX-P3 manual Connecting Other Equipment, To connect audio equipment, English

Continued

English

To remove the speaker grilles (ONLY FOR UX-P5)

The speaker grilles are removed as the illustrations below.

HolesProjections

Speaker grille

Connecting Other Equipment

For UX-P5:	You can connect both of the analog and
	digital equipment.
For UX-P3:	You can connect audio equipment — used
	only as a playback device.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.

To remove the speaker grille, inserting your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.

To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.

For UX-P5

To audio output

To audio input

	OUT
AUX R	L
	IN

Audio equipment

By using audio cords (not supplied), connect:

•Between the audio input jacks on the other equipment and AUX OUT jacks: For recording on the other equipment.

•Between the audio output jacks on the other equipment and AUX IN jacks: For playing the other equipment.

For UX-P3

AUX

RL

To audio output

Audio equipment

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).

– 8 –