To connect the AV COMPU LINK cords
This system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
To use AV COMPU LINK, you need to connect the System and the TV by using a cord with monaural
To connect digital audio
DVD | OPTICAL | |
| ||
DIGITAL | OUT | |
|
| |
PCM/STREAM |
Before connecting optical digital cord, remove the protective cap from the DVD OPTICAL DIGITAL OUT terminal.
Adjusting the Voltage Selector
Use a screwdriver to slide the voltage selector so that the voltage marker is pointing at the same voltage as where you are plugging in the unit. (See also the back cover page.)
Voltage marker
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
Changing the Scanning Mode | Remote |
ONLY |
This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the
PROGRESSIVE
0PROGRE
INTER
(at the same time)
PROGRE Progressive scanning. For a progressive TV.
INTER Interlaced scanning. For a conventional TV.
7