To adjust the picture tone
1Select “USER1” or “USER2.”• Follow steps 1 and 2 explained on page 18.
2Select a parameter you want to adjust.ENTER
GAMMA | Adjust if the neutral color is bright or |
| dark |
|
|
BRIGHTNESS | Adjust if the entire picture is bright |
| or dark |
|
|
CONTRAST | Adjust if the far and near positions |
| are unnatural |
|
|
SATURATION | Adjust if the picture is whitish or |
| blackish |
|
|
TINT | Adjust if the human skin color is |
| unnatural |
|
|
SHARPNESS | Adjust if the picture is indistinct |
| |
|
|
ENTER
4Repeat steps 2 to 3 to adjust other parameters.To erase the screen, press VFP again while holding SHIFT.
Setting the Clock | Remote |
ONLY |
Without setting the
•To exit from the clock setting, press CLOCK/TIMER as required.
•To go back to the previous step, press CANCEL.
1Activate the clock setting mode.CLOCK/
TIMER
1 2 3 4 5
•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.
2Adjust the hour.SET
3Adjust the minute.SET
Now the
DISPLAY | Clock |
Source information
•While playing a DVD and MP3/WMA, you cannot check the current clock time (see page 11).
19