Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.
General:
Adjustments or settings are suddenly canceled before you finish.]There is a time limit. Repeat the procedure again.
Operations are disabled.]The
]The path between the remote control and the remote sensor on the System is blocked.
]The batteries are exhausted.
No sound is heard.]Speaker connections are incorrect or loose.
]Headphones are connected.
No picture appears on the screen.]The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts.
]The System is connected to a TV which does not support progressive scanning.
The left and right edges of the picture are missing on the screen.]Select “4:3 LB” for “MONITOR TYPE” (see page 38).
Radio Operations:
Hard to listen to broadcasts because of noise.]Antennas connections are incorrect or loose.
]The AM loop antenna is too close to the System.
]The FM antenna is not properly extended and positioned.
Disc Operations:
The disc does not play.]The disc is placed upside down. Place the disc with the label side up.
ID3 Tag on an MP3/WMA disc cannot be shown.]There are two types of ID3
]The playing order is determined when the disc was recorded. It depends on the writing application.
]The inserted disc may includes both type of tracks (MP3/WMA files and JPEG files). In this case, you can
only play back the files selected by the “FILE TYPE” setting (see page 39).
]You have changed the “FILE TYPE” setting after you inserted a disc. In this case, reload the disc.
“NO AUDIO” appears.]This System cannot play back illegally produced DVD Audio discs.
“LR ONLY” appears.]Some DVD Audio discs prohibit downmixed output. When you play back such a disc, this System plays back the left front and right front signals only.
The disc sound is discontinuous.]The disc is scratched or dirty.
The disc tray does not open or close.]The AC power cord is not plugged in.
]Child Lock is in use (see page 26).
Tape Operations:
The cassette holder cannot be opened.]Power supply from the AC power cord has been cut off while the tape was running. Turn on the System.
Recordings:
Impossible to record.]Small tabs on the back of the cassette are removed. Cover the holes with adhesive tape.
Timer Operations:
Daily Timer and Recording Timer do not work.]The System has been turned on when the
Setup Menu Operations:
No subtitle appears on the display though you have selected the initial subtitle language.
]Some DVDs are programmed to always display no subtitle initially. If this happens, press SUB TITLE (while holding SHIFT) after starting play (see page 22).
Audio language is different from the one you have selected as the initial audio language.
]Some DVDs are programmed to always use the original language initially. If this happens, press AUDIO (while holding SHIFT) after starting play (see page 21).
46