Presetting Automatic DVD Sound Increase
Remote
Level ONLY
The DVD sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the volume every time you change the source.
DVD LEVEL
NORMAL MIDDLE
9
HIGH
(at the same time)
NORMAL Original recording level.
MIDDLE Output level is increased (less than “HIGH”).
HIGH Output level is increased (more than “MIDDLE”).
•Once the current DVD is ejected, this setting is canceled and set automatically to “NORMAL.”
Adjusting the Audio Input Level | Remote |
ONLY |
If the sound from the component connected to the
AUX jacks is too loud or is not loud enough when changing from another source to “AUX,” you can change the audio input level through the AUX jacks (without changing the volume level).
While the “AUX” is selected as a source...
2sec.
SET | AUX LVL 1 |
|
AUX LVL 2
AUX LVL 1 Select this when the sound is too loud (initial setting).
AUX LVL 2 Select this when the sound is not loud enough.
Changing the Display Brightness | Remote | ||
ONLY | |||
You can dim the display window. |
|
| |
DIMMER | DIM 1 | DIM 2 | |
| |||
| DIM OFF | AUTO DIM | |
| (Canceled) |
|
|
DIM 1 | Dims the display. |
|
|
DIM 2 | Erases the display illumination. |
AUTO DIM Erase the display illumination a few seconds after disc playback starts.
•The display illuminates when playback stops.
Changing the Picture Tone | Remote | |
ONLY | ||
|
While showing a playback picture on the TV screen, you can select the preset picture tone, or adjust it and store your own likeliness.
To select a preset picture tone
1Activate VFP.
| NORMAL |
| |
VFP | GAMMA | 0 | |
BRIGHTNESS | 0 | ||
6 | |||
CONTRAST | 0 | ||
| SATURATION | 0 | |
| TINT | 0 | |
| SHARPNESS | 0 | |
(at the same time) | On the TV screen |
| NORMAL | CINEMA |
| USER2 | USER1 |
NORMAL | Normally select this. |
|
CINEMA | Suitable for a movie source. |
USER1/USER2 You can adjust parameters and can store the settings (see page 19).
18