BEAT CUT button (using the remote control unit)
When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. In such case, set this button after setting the deck to the record mode so that the beats are elimi- nated. Normally set this button to
BEAT CUT
CLOCK ADJUSTMENT
Names of parts in the clock/timer section, and their functions:
Erasing
A recorded tape can be erased by recording new material over the pre- vious material.
To erase a tape without making a new recording...
1.Press the TAPE (23) button to set to the TAPE mode.
2.Press the 7 button.
3.Insert the cassette with the side to be erased facing out.
4.Press the ONE TOUCH REC button.
It should be noted that it may be unlawful to
~ Ù ! Ú @
REC ON | SLEEP |
OFF CLOCK
COMPACT
DIGITAL AUDIO
ACTIVE HYPER | TIMER/SNOOZE |
| ||
BASS PRO |
| |||
|
|
|
| OPEN |
CLOCK |
|
| ULTI JO | G |
|
| M | ||
ONE TOUCH |
| BAND |
|
|
REC |
|
|
|
|
| TAPE | TUNER | CD |
|
Û # Ü
~Timer mode indicator
ÙTimer indicator (ON/OFF) ! CLOCK indicator
Ú SLEEP indicator @ Time display Û CLOCK button
# TIMER/SNOOZE button Ü MULTI JOG dial
It is used to set the current time and perform timer setting.
Setting the current time (when this unit is used for the first time)
(Example: To set the clock to 13:15.)
1
2
3
CLOCK
Back | Advance |
ULTI JO | G |
M |
CLOCK | CLOCK |
CLOCK | CLOCK | CLOCK |
Within the 2 minutes.
ULTI JO | G |
M |
CLOCK
One hour is advanced/moved back every 2 clicks. | CLOCK | CLOCK |
One minute is advanced/moved back every 2 clicks.
1Connect the AC power cord; “CLOCK” will blink in the display.
2 Press the CLOCK button for 2 seconds or more.
3 Set to 13: 15 using the MULTI JOG Dial and CLOCK button.
●Setting the current time.
Use the time signal of television and radio broadcasts. When adjusting the clock, follow steps 2 – 3.
Notes:
●Before performing timer recording or playback, it is necessary to set the current time.
●It is recommended to set the current time with the button set to STANDBY so that the current display mode is maintained.
●When the power cord is plugged in again after being disconnected or power is restored after a power failure, “CLOCK” will blink in the dis- play. Set the current time again.
13