■Using External Equipment
REMOTE CONTROL
DIMMER SLEEP
DISPLAY FM MODE TAPE/AUX
TAPE/AUX
AUTO
AHB PRO PRESET CD 
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
EDIT
/TITLECHARA
UP
SET
DOWN
MD TUNER CD
BAND
VOLUME
Listening to External
Equipment
You can listen to external equipment.
■First make sure that the external equipment is properly connect- ed to the System. (See pages
■1. Set the VOLUME control to the minimum position.
■2. Press the TAPE/AUX button.
Each time you press the button, the display changes between AUX1 and AUX2.
(Stays lit.)
(Stays lit.)
When the “AUX 1 (ANALOG IN)” is selected:
You can use the external equipment connected to the LINE IN (AUX1) terminals of the System, such as cassette deck, turnta- ble, etc.
•To listen to the external equipment, start playing the exter- nal equipment.
When the “AUX 2 (DIGITAL IN)” is selected:
You can use the external equipment connected to the OPTICAL DIGITAL IN (AUX2) terminal of the System, such as CD play- er, etc.
•To listen to the external equipment, start playing the exter- nal equipment.
■3. Start playing the external equipment.
■4. Adjust the VOLUME control to the desired listening level.
■5. Apply sound effects, if you wish.
■Press the AHB PRO button to reinforce the bass sound.
■Press the BASS/TREBLE button on the Remote Control to con- trol the tone. (See “Tone Control” on page 7.)
To exit TAPE/AUX mode, you will automatically switch out of TAPE/AUX mode when you select another source.
Note: For operation of the external equipment, refer to its Instruc- tions.
To record an external music source to an MD, see “Recording onto an MD” on page 14.
STANDBY/ON |
|
| TAPE/AUX |
| BAND |
| CD |
|
| OPEN/CLOSE | |
TAPE/AUX | MD TUNER | CD |
|
DOWN | MULTI CONTROL | UP | MD |
EJECT |
PHONES
Recording the System’s source to External Equipment
You can record the System’s source to external equipment which is connected to the LINE OUT terminals of the System, such as cas- sette deck, etc.
■First make sure that the external equipment is properly connect- ed to the System. (See page 4).
■1. Play the System’s CD Player, MD Player, or tune into a station.
■The recording level is not affected by the VOLUME level set by the System. Also it is not affected by the sound effects.
Note: For operation of the external equipment, refer to its Instruc- tions.
21
