Manuals / JVC / Home Audio / Stereo System

JVC UX-V9MD Connecting the FM Antenna, Connecting the AM MW/LW Antenna, Rear Panel of the Unit

Models: UX-V9MD

1 31

Download 31 pages 46.51 Kb

Page 5

Connecting the FM Antenna

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

Rear Panel of the Unit

Using the Supplied Wire Antenna

L

FM wire antenna (supplied)

OPTICAL DIGITAL IN (AUX2)

Using the Coaxial Type Connector (Not Supplied)

A 75-ohm antenna with coaxial type connector (IEC or DIN45 325) should be connected to the FM 75-ohm COAXIAL terminal.

R

R L

If reception is poor, connect the outdoor antenna.

FM outdoor antenna (Not supplied)

Coaxial cable

Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM Wire Antenna.

Connecting the AM (MW/LW) Antenna

Rear Panel of the Unit

AM loop antenna (Supplied)

OPTICAL DIGITAL IN (AUX2)

L

R

R L

CAUTION: To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.

Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base.

ANTENNA

FM (75Ω )

COAXIAL

AM EXT

AM LOOP

Turn the loop until you have the best reception.

3

Image 5

JVC UX-V9MD manual Connecting the FM Antenna, Connecting the AM MW/LW Antenna, Using the Supplied Wire Antenna

Contents

AHB PRO PRESET CD PROGRAM RANDOM REPEAT BASS TREBLE CANCEL EDIT REMOTE CONTROL RM-RXUV9MD DIMMER SLEEP DISPLAY FM MODE TAPE/AUX AUTOTITLECHARA UP SET DOWN MD TUNER CD BAND VOLUME UX-V9MDIMPORTANT FOR LASER PRODUCTS Warnings, Cautions and OthersCLASS LASER PRODUCT Caution - switchFeatures Table of Contents1. Installation of the System 2. Power cordHow To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedRemoving the speaker grilles Connecting the SpeakersConnecting External Equipment Connecting the AC Power Cord Connecting a CD Player, etc Digital Input AUX2AUTOMATIC POWER ON On the Remote ControlAdjusting the Volume Turning the Power On and OffAdjusting the Brightness DIMMER When the System is Turned On1. Press the TREBLE button on the Remote Control Remote Control to adjust the bass levelRemote Control to adjust the treble level Using the CLOCK button on the UnitTuning In a Station Using the TunerPresetting Stations Manual Presetting2. Press the AUTO PRESET button on the Auto PresettingRemote Control for more than two sec- onds To change the preset stations, repeat the same steps asBasics of Using the CD Player-Normal Play Using the CD PlayerTo Insert a CD To Unload a CDPress the REPEAT button on the Remote Control 1. Press the RANDOM button on the Remote ControlProgramming the Playing Order of the Tracks Random PlayBasics of Using the MD Player - Normal Play Using the MD Player Listening to an MDPress the DISPLAY button on the Remote Control To Insert an MD3. Press the 7 button to stop the MD. 4. Press the PROGRAM button 1. Insert an MD 2. Press the MD #8 button8. Press the MD #8 button 2. Press the MD #8 buttonStandard Recording Recording onto an MDRecording Preparation Before RecordingCD Synchro Recording Press the DISPLAY button on the Remote Control repeat- edlyChecking the Remaining Time of the MD Track markingDividing tracks DIVIDE function Using the MD Player EditingJoining tracks JOIN function Erasing tracks ERASE functionDividing Tracks DIVIDE Function 6. Press the SET button at the point where the track is to be divided1. Insert an MD to be edited with its label side up 2. Press the MD #8 button and then 7 button to set the function to MDMoving Tracks MOVE Function Joining Tracks JOIN FunctionErasing Tracks ERASE Function 3. Press the EDIT/TITLE button until “JOIN ?” is displayedGiving Titles to MD DISC TI- TLE/TITLE Function Erasing all the Tracks ALL ERASE Function3. Press the EDIT/TITLE button until “ERASE ?” is displayed 5. Select the track number to be erasedNumbers Character Layout TableUppercase letters 1. Set the VOLUME control to the minimum position Using External Equipment4. Adjust the VOLUME control to the desired listening level When the “AUX 1 ANALOG IN” is selectedSetting the Clock Using the TimersSetting the Daily Timer 3. Setting the OFF time Example5. Setting the volume level Setting the SLEEP Timer6. Press the TIMER/SNOOZE button on the Unit Press the TIMER/SNOOZE button on the UnitInformation on MDs Minidiscs UTOC User Table Of ContentsThe cartridge Two types of minidiscPROTECTED SCMS CANNOT COPY DIGITAL IN UNLOCK LOAD ERROR BLANK DISC CANNOT JOIN DISC ERROR DISC FULL DISC PROTECTEDMD Minidisc Messages Minidisc LimitationsCleaning the lens Care And MaintenanceRules of Digital Dubbing SCMS Serial Copy Management SystemSymptom TroubleshootingPossible Cause ActionSpeaker Specifications SpecificationsAccessories Power SpecificationsVICTOR COMPANY OF JAPAN, LIMITED 0699MNMCREJSC