Manuals / JVC / Home Audio / Stereo System

JVC UX-V9MD Warnings, Cautions and Others, Important For Laser Products, Class Laser Product

Models: UX-V9MD

1 31

Download 31 pages 46.51 Kb

Page 2

Warnings, Cautions and Others

Warnings, Cautions and Others

Caution — switch!

Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1Do not remove screws, covers or cabinet.

2Do not expose this appliance to rain or moisture.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate

the apparatus as follows:
1 Front:	No obstructions and open spacing.

2Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom:	Place on the level surface. Maintain an
	adequate air path for ventilation by placing
	on a stand with a height of 10 cm or more.

1CLASS 1 LASER PRODUCT

2DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3CAUTION: Do not open the top cover. There are no user service- able parts inside the Unit; leave all servicing to qualified service personnel.

Front view

15 cm

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE

CLASS 1

LASER PRODUCT

2 WARNING LABEL, PLACED INSIDE THE UNIT

Side view

15 cm

		MICRO COMPONENT SYSTEM
		UX-V9MD
15 cm	1 cm	STANDBY/ON			1 cm	15 cm
		BAND		CD
		BAND		OPEN/CLOSE
		TAPE/AUX MD TUNER	CD
				MD
				EJECT
		PHONES
		UX-V9MD				10 cm
						10 cm

15 cm

UX-V9MD

G-1

Image 2

JVC UX-V9MD Warnings, Cautions and Others, Important For Laser Products, Class Laser Product, Caution - switch, Front view

Contents

TITLECHARA UP SET DOWN MD TUNER CD BAND VOLUME REMOTE CONTROL RM-RXUV9MD DIMMER SLEEP DISPLAY FM MODE TAPE/AUX AUTOAHB PRO PRESET CD PROGRAM RANDOM REPEAT BASS TREBLE CANCEL EDIT UX-V9MDCLASS LASER PRODUCT Warnings, Cautions and OthersIMPORTANT FOR LASER PRODUCTS Caution - switch1. Installation of the System Table of ContentsFeatures 2. Power cordUsing the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaConnecting the AM MW/LW Antenna Using the Coaxial Type Connector Not SuppliedRemoving the speaker grilles Connecting the SpeakersConnecting External Equipment AUTOMATIC POWER ON Connecting a CD Player, etc Digital Input AUX2Connecting the AC Power Cord On the Remote ControlAdjusting the Brightness DIMMER Turning the Power On and OffAdjusting the Volume When the System is Turned OnRemote Control to adjust the treble level Remote Control to adjust the bass level1. Press the TREBLE button on the Remote Control Using the CLOCK button on the UnitPresetting Stations Using the TunerTuning In a Station Manual PresettingRemote Control for more than two sec- onds Auto Presetting2. Press the AUTO PRESET button on the To change the preset stations, repeat the same steps asTo Insert a CD Using the CD PlayerBasics of Using the CD Player-Normal Play To Unload a CDProgramming the Playing Order of the Tracks 1. Press the RANDOM button on the Remote ControlPress the REPEAT button on the Remote Control Random PlayPress the DISPLAY button on the Remote Control Using the MD Player Listening to an MDBasics of Using the MD Player - Normal Play To Insert an MD8. Press the MD #8 button 1. Insert an MD 2. Press the MD #8 button3. Press the 7 button to stop the MD. 4. Press the PROGRAM button 2. Press the MD #8 buttonRecording Recording onto an MDStandard Recording Preparation Before RecordingChecking the Remaining Time of the MD Press the DISPLAY button on the Remote Control repeat- edlyCD Synchro Recording Track markingJoining tracks JOIN function Using the MD Player EditingDividing tracks DIVIDE function Erasing tracks ERASE function1. Insert an MD to be edited with its label side up 6. Press the SET button at the point where the track is to be dividedDividing Tracks DIVIDE Function 2. Press the MD #8 button and then 7 button to set the function to MDErasing Tracks ERASE Function Joining Tracks JOIN FunctionMoving Tracks MOVE Function 3. Press the EDIT/TITLE button until “JOIN ?” is displayed3. Press the EDIT/TITLE button until “ERASE ?” is displayed Erasing all the Tracks ALL ERASE FunctionGiving Titles to MD DISC TI- TLE/TITLE Function 5. Select the track number to be erasedNumbers Character Layout TableUppercase letters 4. Adjust the VOLUME control to the desired listening level Using External Equipment1. Set the VOLUME control to the minimum position When the “AUX 1 ANALOG IN” is selectedSetting the Daily Timer Using the TimersSetting the Clock 3. Setting the OFF time Example6. Press the TIMER/SNOOZE button on the Unit Setting the SLEEP Timer5. Setting the volume level Press the TIMER/SNOOZE button on the UnitThe cartridge UTOC User Table Of ContentsInformation on MDs Minidiscs Two types of minidiscMD Minidisc Messages BLANK DISC CANNOT JOIN DISC ERROR DISC FULL DISC PROTECTEDPROTECTED SCMS CANNOT COPY DIGITAL IN UNLOCK LOAD ERROR Minidisc LimitationsRules of Digital Dubbing Care And MaintenanceCleaning the lens SCMS Serial Copy Management SystemPossible Cause TroubleshootingSymptom ActionAccessories SpecificationsSpeaker Specifications Power Specifications0699MNMCREJSC VICTOR COMPANY OF JAPAN, LIMITED