JVC V1700CG  Item Contents And Adjustment Range/Settings, Aperture Control, sub menu POSITION

ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS

1.APERTURE CONTROL

Compensates the frequency

characteristics of the input						<APERTURE CONTROL>
video signal. Press the				LEVEL			:00
				CONTROL FREQ.			:HIGH
button to display the setting					sub menu
					reset
menu illustrated on the right.
NOTE : APERTURE
	CONTROL is not			EXIT: MENU ADJUST:- + SELECT:
	displayed when the
	RGB signal is input.
Item		: LEVEL
Adjustment
range	: 00 ~ +10
Function		: Adjusts the compensate value. The higher the
			number is, the larger the compensate value gets.
Item		: CONTROL FREQ.
Settings		: HIGH/LOW/OFF
Function		: Adjusts the frequency compensation.
			HIGH : Compensates the high frequencies.
			LOW : Compensates the low frequencies.
			OFF : Deactivates the aperture compensation.
Item		: sub menu
Adjustment range/
Settings		: Same as LEVEL or CONTROL FREQ.
Function		: Performs the LEVEL or CONTROL FREQ.
			settings in a single-line display. The display
			position depends on the “sub menu POSITION”
			setting.

3. sub menu POSITION

Items	: Selects the display position of the sub menu
	superimposed on the screen.
Settings	: UPPER/LOWER

Functions : UPPER : An adjustment item is displayed on the

top of the screen.

	LOWER : An adjustment item is displayed on the
	bottom of the screen.
4. AREA MARKER
Items	: Selects the size marker for the other screen ratio
	(aspect) used when the screen ratio is 16:9.
Settings	: OFF/4:3/16:9/14:9/13:9/MODE 1/MODE 2

Functions : OFF: The marker is not displayed. 4:3/16:9/14:9/13:9: Displays the marker (a white quadrangle) showing the screen size of each aspect ratio.

MODE 1/MODE 2: Displays no markers because these settings will be used for function expansion in the future.

●AREA MARKER is displayed when a 16:9 picture such as 1080i/1035i/720p etc. is displayed or the picture is switched to the 16:9 screen ratio by pressing the ASPECT button.

●To actually display the marker, the AREA MARKER button on the monitor needs to be pressed so that it is illuminated.

Item	: reset
Function	: Sets the LEVEL and CONTROL FREQ. values to
	factory-preset ones.

2.SLOT CONDITION

Displays the status of the input

cards installed in each of the input card slots. Press the button to display the setting menu illustrated on the right.

<SLOT CONDITION>

INPUT A		: VIDEO-1
INPUT B		: VIDEO-2
INPUT C		: COMPO.
INPUT D		: RGB
INPUT E		: NO SLOT
INPUT F		: NO SLOT
EXIT:
	MENU

16:94:3

14:913:9

Items	: INPUT A:/INPUT B:/INPUT C:/INPUT D:/INPUT
	E:/INPUT F:
Settings	: VIDEO-1/VIDEO-2/COMPO./RGB/SDI 1/SDI 2/
	HD SDI 1/HD SDI 2/NO SLOT
Function	: Displays the status of the input cards installed in
	each of the input card slots.

●INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2, and INPUT E/F to SLOT 3.

●VIDEO-1 or VIDEO-2 shows the video input card is installed. COMPO. or RGB shows the component/RGB input card. SDI 1 or SDI 2 shows the SDI input card is installed.

HD SDI 1 or HD SDI 2 shows the HD SDI input card is installed.

●NO SLOT shows no input cards are installed.

11