Controls And Features, Front View, 2 3 4, Tally lamp

CONTROLS AND FEATURES

FRONT VIEW

SLOT1	SLOT2	SLOT3	POWER
	INPUT SELECT

2 3 4 5

6 7

VOLUME

9 1011121617181920212223

DEGAUSS	UNDER	PULSE	COLOR
DEGAUSS	SCAN	CROSS	OFF	SLOT1		SLOT2	SLOT3	POWER
				SLOT1		SLOT2	SLOT3	POWER
			A	B	C	D	E	F
MENU	SCREENS	ASPECT	AREA		INPUT SELECT
	CHECK		MARKER

8 131415

1 Tally lamp

Lights when the tally control signal is ON. The tally control signal is input through the MAKE remote terminal. For details, refer to Page 17.

2 PHASE adjustment knob

Adjusts picture hue. Turn the knob to the left to make the picture redder, and turn it to the right to make the picture greener.

3 CHROMA adjustment knob

Adjusts picture colour density. Turn the knob to the left to make the picture colour lighter, and turn it to the right to make the picture colour deeper.

4 BRIGHT adjustment knob

Adjusts picture brightness. Turn the knob to the left to make the picture darker, and turn it to the right to make the picture brighter.

5 CONTRAST adjustment knob

Adjusts picture contrast. Turn the knob to the left to make the picture contrast lower, and turn it to the right to make the picture contrast higher.

6 VOLUME buttons

Adjusts the speaker volume. Also used to set or adjust menu screen items.

8 MENU button

Displays, adjusts or closes a menu screen.

9 DEGAUSS button/lamp

Press the DEGAUSS button. The button lights and degaussing is performed automatically. When the degaussing is completed, the light goes off.

10 UNDER SCAN button/lamp

Press the UNDER SCAN button. The button lights and the screen is reduced (under-scan) and the whole screen is displayed. When the UNDER SCAN button is pressed while lit, the light goes off and the screen returns to normal size (over-scan). Use this function to check the whole screen.

NOTE: This function is invalid with the RGB-input screen.

11 PULSE CROSS button/lamp

Press the PULSE CROSS button. The picture is separated into 4 parts. The synchronised signal displayed in the shape of a cross separating the parts. The screen automatically brightens to make it easier to confirm synchronised sections easy. When the PULSE CROSS button is pressed while lit, the light goes off and the normal screen is restored.