SAFETY PRECAUTIONS

In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions.

WARNINGS

To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, contrast qualified service personnel. Never try to service it yourself.

WARNING : THIS APPARATUS MUST BE EARTHED.

Improper operations, in particular alternation of high voltage or changing the type of tube may result in x-ray emission of considerable dose. A unit altered in such a way no longer meets the standards of certification, and must therefore no longer be operated.

This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.

FCC NOTICE (U.S.A. only)

CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

PRECAUTIONS

Use only the power source specified on the unit.

(120 V/230 V AC, 50 Hz/60 Hz)

Keep flammable material, water, and metal objects away from the unit – especially the interior of the unit.

This unit incorporates high voltage circuitry.

For your own safety and that of your equipment, do not attempt to modify or disassemble this monitor.

There are no user-serviceable parts inside.

Video or audio signals cannot be input to this monitor without optional input cards.

In these instructions, all explanations (except where noted) refer to the DT-V1700CG with input cards installed.

HANDLING

Avoid shocks or vibrations. These may damage the unit and cause it to malfunction.

Do not block the ventilation slots.

Do not expose this unit to high temperatures. Extended exposure to direct sunlight or a heater could deform the cabinet or cause the performance of internal components to deteriorate.

Do not place the unit near appliances generating strong electric or magnetic fields. There can generate picture noise and instability.

Keep the monitor clean by wiping the cabinet and CRT screen with a piece of soft cloth. Do not apply thinner or benzine. These chemicals can damage the finish and erase printed letters. When the unit is excessively dirty, use a diluted neutral cleanser, then wipe away the cleanser with a dry cloth.

SCREEN BURN

It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images.

DEGAUSS

Do not use a magnet eraser to degauss the monitor’s cathode ray tube from the outside. Doing so may distort its aperture grill and cause a malfunction.

2

Page 2
Image 2
JVC V1700CG manual Safety Precautions, FCC Notice U.S.A. only

V1700CG specifications

The JVC V1700CG is a versatile camcorder designed for both amateur and professional videographers, offering a blend of advanced technology and user-friendly features. It is built to deliver high-quality video capture, boasting a range of specifications that set it apart in the competitive market of digital camcorders.

One of the key features of the JVC V1700CG is its impressive 1/3-inch progressive scan CMOS sensor, which allows for high-resolution video recording at up to 1080p. This sensor is designed to deliver clear and detailed images even in low-light conditions, making it an ideal choice for various shooting scenarios. The camcorder also supports a wide dynamic range, ensuring that bright highlights and deep shadows are captured with clarity.

The V1700CG is equipped with a powerful 20x optical zoom lens, which provides versatility for capturing distant subjects without sacrificing image quality. The lens features advanced optical stabilization technology that minimizes camera shake, ensuring smooth and steady footage, even when shooting handheld or while in motion. This feature is particularly beneficial in dynamic shooting environments, where stability is crucial.

In addition to its optical capabilities, the JVC V1700CG includes several digital enhancements, such as automatic face detection and scene modes, which optimize settings based on the environment and subject. This makes it easier for users to achieve professional-looking results without extensive technical knowledge. The camcorder also features a built-in microphone that captures clear audio, along with the option to connect external microphones for enhanced sound quality.

Connectivity options on the JVC V1700CG are also noteworthy, with HDMI and USB outputs that facilitate easy sharing and editing of video content. The camcorder supports various storage formats, including SD, SDHC, and SDXC cards, allowing for ample recording space and flexibility.

Moreover, the ergonomic design of the V1700CG makes it user-friendly, with an intuitive interface and a rotating LCD display that enables easy framing and monitoring of shots from different angles. Overall, the JVC V1700CG stands out as a reliable and feature-rich camcorder, perfect for those looking to elevate their video production capabilities. Whether for personal projects or professional use, this camcorder delivers exceptional performance and quality.