JVC VN-T216VPRU manual Update, Daylight

Daylight

Figure 4-41 Daylight

Daylight Saving

Select “ON” to activate the daylight-saving function if you are in a daylight saving time zone (effective for NTP mode only), and then choose the starting time ,ending time and time adjustment.

Please click the “Save” button to save your settings. You can also

Note click the left button “Reset to Default” to set all the data and options as defaults.

Update

You can update system firmware if the update file is available. It is the customer's responsibility to update firmware. All camera motions will shut down during firmware update. Close any other screens before starting a firmware update. Never disconnect power and LAN cable during the firmware update process. Rebooting the camera after firmware update may take approx. 15 minutes. After you finish FW update, please reboot your computer first time. Be careful, power can’t be shut down when you’re updating firmware. Otherwise, it will cause FW update failure and you have to call back to maintenance.

Figure 4-42 Firmware Update

43