![This mounting kit](/images/new-backgrounds/28823/2882315x1.webp)
•4S Electrical junction box(Optional)
1.Secure the mounting kit (optional) to 4S Electrical box using 2 appropriate screws.
2.Then secure the camera case to mounting kit using 2 appropriate screws.
3.Tuck the cables in the 4S Electrical box.
4.Adjust the view angle (zoom, focus, and Horizontal Rotation).
5.Attach the camera housing.
6.Turn the power on after you have installed the camera.
Note
This mounting kit
is optional
accessory.
Depending on the material of your mounting surface, you may require different
screws and anchors than those supplied.
If tilt angle is less than 20 degrees from the horizontal, the image can flash by
Note reflection of
7