Adjusting the Camera Position
The dome camera has three axes for positioning the camera. While monitoring the picture on the monitor, adjus t the camera position as follows:
∙Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base (maximum360° ) until you are satisfied with the field of view.
∙Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn assembly more than 360° as this assembly may cause the internal cables to twist and disconnect or break.
∙Tilt Adjustment (C) After loosening the thumbnuts, position the camera as desired, then finger
Caution | Do not turn the lens more than 360° as this may cause internal cables to | ||
disconnect or break. | |||
| |||
|
|
| |
|
|
| |
Caution Retighten the locking screws to prevent loss of adjustment.
5
