JVC VR-609
•Rear
① ② |
|
| ⑤ |
| ⑨ ⑩ |
③ | ④ |
| ⑧ | ⑭ | |
|
| ⑥ ⑦ |
| ||
|
| ⑪ | ⑫ | ||
|
|
| |||
|
|
|
| ||
| ⑬ |
|
|
| ⑮ |
|
|
|
|
|
①LAN : Enables screen search and control via Network. (Please use a category 5 cable with a shield.)
②USB Port 1,2 : For backup with external FDD or memory stick. It does not work both USB1 & 2 at the same time. Please use one of them.
!Please turn off the power when you connect external USB with DVR.
③Spare : This terminal is not used.
④
cable with a shield.)
⑤ALARM IN : For alarm input. (Please use a shielded cable.)
ALARM OUT : For alarm output. (Please use a shielded cable.)
⑥IEEE 1394 Port: Possible to extend storage space or backup by adding external IEEE1394 or CDRW.
!Please turn off the power when you connect external IEEE1394 with DVR.
!If you connect external HDD with external CDRW, impossible to recognize.
⑦VGA OUT : Possible to connect with computer monitor. (CRT type)
Please
⑧Y/C OUT : Outputs contents of monitor output as a
⑨MONITOR OUT 1,2 (Composite) : Menu appears at the time of menu setting and
displays when screen search or recording.
⑩SPOT OUT (Composite) : Outputs video which is
⑪MODE(PAL/NTSC) : Selects input video signal mode.
If you change PAL/NTSC, once it carries out
!When PAL/NTSC is changed, former record data is deleted!
An administrator password is reset when the PAL/NTSC mode is changed. Please disable a password setting before changing the PAL/NTSC mode. When PAL/NTSC mode is changed with a password setting enable, please use a default password "1234".
⑫AUDIO : I/O for audio recording/playback.
⑬VIDEO IN BNC & THROUGH OUT (CH1 ∼ CH9)
:Inputs asynchronous video signal 1.0Vp-p.( 75 ohm )
:Loop out is changed to
⑭POWER Switch
: This is the main power switch.
⑮AC INLET : For connecting with power cord.
